Author Topic: Melody / Chord volume  (Read 1542 times)


  • Newbie
  • *
  • Posts: 16
    • View Profile
Melody / Chord volume
« on: October 27, 2017, 11:26:16 PM »
Really enjoying the expanding capabilities!
Is there a means for adjusting the volume of melody and chords separately? I didn't find it. If not, is that something which might be implemented?


  • Administrator
  • Full Member
  • *****
  • Posts: 158
    • View Profile
Re: Melody / Chord volume
« Reply #1 on: October 29, 2017, 10:02:37 PM »
Cool! :) Of course, that is quite simple to do, the hardest thing is to decide where to put the settings so the whole "menu system" stays well organized. It is easy enough to put it into the app but the goal is to have it all achievable with a stand-alone unit in the first place.

There are other things too which should be configurable - e.g. low-pass vs. high-pass mode deserves a separately remembered setting for mic gain, as the usual level that is high enough for low-pass is way too loud for high-pass. Then, separate volume for melody played by filter vs. melody played by sampled sound. Adjustable mixing volumes of delay line - currently it is at 2/3 multiplier but might not be ideal in every case, and who knows maybe mixing the signal back into the loop at 99% will produce interesting results. And this all is just for starters, every new added mode/feature will probably require new group of settings too :D