Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - synth_player

Pages: [1]
Hardware Questions / Re: accelerometer working or not ?
« on: January 02, 2020, 09:10:31 PM »
Yes 4321 is my friend  :-*
You're right sometimes its hard to hear what the Acc is doing and
there is no direct correlation between sensors 1-4 and the Acc axis' XYZ

I determined that my units Acc is working fine by using ch#121 the WIP drum ch...
left-snare/right-cym.... front-bass/back-hat

Then I went thru each ch and figured out each axis and if a sensor was duplicated by an axis
Z axis (up/down) is gonna be a tough one to implement  :o
You are correct about the assignments on those other chs

Good to confirm the Config Acc on/off is not working and the new chs #23 #24 Acc do nothing...
and both will be fixed next update... Cool !!!
Thanx for your hard work Mario...I love this thing
Happy 2020 !

Hardware Questions / accelerometer working or not ?
« on: December 29, 2019, 02:51:39 AM »
I can't tell if the Accelerometer is working... It seems to kinda work on some channels and not others
When I use the configuration setting ( Set>B1>B2) to change between Sensors / Acc. the lights DO NOT blink...the Inversion & Orientation lights do change to indicate  those setting changes
The lights DO blink when using 3333 & 4444 to change back and forth between Acc. & Sensor

Is the Acc supposed to work with all channels by just replacing the sensors?
It doesn't work on the new chs #23 & #24,  #31, #43, #44... the Acc kinda works with #32
I know that for chs that do not use sensors, the Acc. will not work

I just updated to 1.0.116...never tried the Acc in the older .115 firmware so I don't know if it used to work
I have an acrylic sandwich serial # 2xx
What do you think is the problem ?

Hardware Questions / Re: MIDI and SD Card
« on: December 21, 2019, 10:22:55 PM »
I think all the other ch's are still good...
If you tell me which ones seem broke, I'll check mine

Hardware Questions / Re: MIDI and SD Card
« on: December 21, 2019, 10:53:38 AM »
Check the last paragraph of Mario's Nov 19 post directly above mine...follow his instructions

Hardware Questions / Re: MIDI and SD Card
« on: December 20, 2019, 12:12:06 AM »
Been checking the "update.htm" and.....
The new firmware (1.0.116)  is here !!!!
The first time it didn't work...
second time I used  "save link as" to put the 2 files on the sd card...
worked fine  ;D
Mario... New channels 23 / 24 are just over the top great  !!
Haven't tried the other improvements yet but I'm sure they're all just as good
Very cool installing the new firmware did not erase my chord progressions
Thanks for getting this out for the holidays... hope you'll have some time to relax
Thx again

Hardware Questions / Re: MIDI and SD Card
« on: November 06, 2019, 04:12:42 PM »
Did you format the SD card ?

I've got a SanDisk 32mb that works fine
I did format it before I don't know if it would've failed without formating

Worth a try !

Pages: [1]